Find

Isobaric, volumetric filling system with electropenumatically controlled valve suitable for filling of carbonated or non carbonated drinks in cans. The cans are placed under the filling valve without the traditional lifting system: it is the filling valve which, by lowering, guarantees a good sealing between can and filling valve. After the flushing phase with gas and next pressurization, the product valve opens and the product flows along the can wall, thus allowing gentle and no foam filling. Once the quantity of product, set in the recipe, has been delivered, the magnetic flowmeter closes the valve. After a settling phase, the decompression valve reduces the pressure in the head space of the can (even in multiple stages) and, after lifting the valve, the container can be transferred to the seamer. The versatile filling system allows, thanks to the recipes memorable in the PLC, great flexibility in the changes due to different products or different levels of carbonation. The format changes are quick with reduced intervention times for different can formats and no part of the filling valve to be replaced in the case of different lids (200,202 or 206).

The Ziegra ZNE 125-K45 ice machine makes up to 125kg of flake ice in one of two sizes and stores 80kg of ice ready for use in a cart below the machine. The machine is mounted above the cart on an elevated frame.

• 125 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 18 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 42 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 125-BK150 ice machine makes up to 125kg of nugget ice per 24 hours into a 150kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and the ice drops into a cart docked below by pulling a handle, thus eliminating manual shovelling of ice from the bin.

• 125 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 18 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 125-S130 ice machine makes up to 125kg of nugget ice and sits on an S130 slope fronted ice storage bin, which stores 130kg of ice ready for use. The ice machine has a discharge tube and built in level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

• 125 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 300-K45 ice machine makes up to 300kg of flake ice in one of two sizes and stores 80kg of ice ready for use in a cart below the machine. The machine is mounted above the cart on an elevated frame.

• 300 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 300-S280 ice machine makes up to 300kg of nugget ice and sits on an S280 slope fronted ice storage bin, which stores 280kg of ice ready for use. The ice machine has a discharge tube and built in level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

• 300 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 300-BK200 ice machine makes up to 300kg of nugget ice per 24 hours into a 200kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and the ice drops into a cart docked below by pulling a handle, thus eliminating manual shovelling of ice from the bin.

• 300 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 500-SG500 ice machine makes up to 500 kg of nugget ice and sits on an SG500 slope fronted ice storage bin, which stores 500 kg of ice ready for use. The ice machine has a discharge tube and built in level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

• 500 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 500-SG500 ice machine makes up to 500 kg of nugget ice and sits on an SG500 slope fronted ice storage bin, which stores 500 kg of ice ready for use. The ice machine has a discharge tube and built in level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

• 500 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 500-BK200 ice machine makes up to 500kg of nugget ice per 24 hours into a 200kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and the ice drops into a cart docked below by pulling a handle, thus eliminating manual shovelling of ice from the bin.

• 500 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 1.000-BK630 WB ice machine makes up to 1,000kg of nugget ice per 24 hours into a 630kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and is designed to allow a  customer to plug their own carts up to 666mm wide below the bin. By simply pulling a handle, the ice falls into the carts, thus eliminating manual shovelling of ice from the bin. Will accept the popular eurocarts often found in bakeries and meat processing factories.

• 1000 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 1.000-BK630 WB ice machine makes up to 1,000kg of nugget ice per 24 hours into a 400 kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and is designed to allow a  customer to plug their own carts up to 666mm wide below the bin. By simply pulling a handle, the ice falls into the carts, thus eliminating manual shovelling of ice from the bin. Will accept the popular eurocarts often found in bakeries and meat processing factories.

• 1000 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE 1.000-BK630 WB ice machine makes up to 1,000kg of nugget ice per 24 hours into a 400 kg elevated ice storage bin. The bin is fully insulated to reduce melting loss and is designed to allow a  customer to plug their own carts up to 666mm wide below the bin. By simply pulling a handle, the ice falls into the carts, thus eliminating manual shovelling of ice from the bin. Will accept the popular eurocarts often found in bakeries and meat processing factories.

• 1000 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

The Ziegra ZNE1.000-SG500 ice machine makes up to 1,000kg of nugget ice and sits on an SG500 slope fronted ice storage bin, which stores 500kg of ice ready for use. The ice machine has a discharge tube and built in level control, which drops ice into the bin below, stops ice production when the bin is full and automatically restarts once ice is removed.

• 1000 kg per day under the condition of + 20 ° C air and + 15 ° C water
• Ice supply to the storage system under the ice maker
• Water supply ¾ ”BSP / 14 mm
• Overflow sensor provided by customer
• System pressure 2-5 bar
• Water hardness 7.2 - 9.5 pH 6 - 14 ° dH 100 - 250 mg CaCO3 / l
• Water temperature + 5 ° С + 30 ° С
• The frame is made of painted steel, on request it can be made of AISI304

TECNA HF-P is the electropneumatic hot filling solution suitable for still beverages, in PET bottles, with controlled recycling in the filling valve to maintain the filling temperature (85-89°C). The filling valve, electropneumatic controlled, is by level, short tube of small diameter, to avoid damages to bottles necks. The product to be filled can be deflected into the container by a swirl system, at the same time the inflowing product displaces the air in the bottle, which is returned to the filling tank through the vent tube. Each filling valve is equipped with a pneumatic recirculation valve with a teflon membrane which allows, in the event of lowering of the temperature, to recirculate the product directly, keeping it warm. In the case of continuous and constant production, the recirculation valves are closed ensuring a zero recirculation flow rate. The interface with the product pasteurizer is easy and the architecture with an external buffer tank for the product allows to avoid the process stop in case of speed fluctuations or short stops of the line. The possibility to have a light vacuum filling also allows to fill products with higher density. The extremely versatile filling system allows, thanks to the recipes memorized in the PLC, great ease in the changes due to the different products. The format changes are quick and with reduced intervention times: for a greater flexibility the automatic system for the centralized adjustment of the fill level, can also be provided.