ISOTHERMAL PANELS AND COLD STORES

SLAUGHTER HOUSES

 

Sandwich panels with tongue and growe junction produced on a continuous line shaper, in compliance with European regulation EN 14509, appropriate for the creation of cold rooms at both positive and negative temperatures. Labelled CE in compliance with European technical approval ETA 10/0001. The Bigsystem panels from the GS 112 Bs2 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly.

Available in 2 versions:

  • GS 112 Bs2_N with micro-ribbed surface finish on 2 sides
  • GS 112 Bs2_L with smooth surface finish on 2 sides

Available thicknesses: mm 40 – 60 – 80 – 100 – 120 – 150 – 180 – 200 – 240

  

Sandwich panels with tongue and growe junction produced on a continuous line shaper, in compliance with European regulation EN 14509, appropriate for the creation of cold rooms at both positive and negative temperatures. Labelled CE in compliance with European technical approval ETA 10/0001. The Bigsystem panels from the GS 112 Cs3 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly.

Available in 2 versions:

  • GS 112 Cs3_N with 0.5 micro-ribbed surface finishing on 2 sides
  • GS 112 Cs3_L with smooth surface finishing on 2 sides

Available thicknesses: mm 40 – 60 – 80 – 100 – 120 – 150 – 180 – 200 - 240.

   

Sandwich panels with male female junction, produced using the one shot air intake injection system, in compliance with European regulation EN 14509, appropriate for the creation of cold rooms at positive or negative temperatures. The Bigsystem panels from the PGS 112G Bs3 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly. A perfect union between panels and easy assembly is supported by the use of eccentric fixing hooks.

Available in 2 versions:

  • PGS 112G Bs3_N with 0.5 micro-ribbed surface finish on 2 sides
  • PGS 112G Bs3_L with smooth surface finish on 2 sides

Available thicknesses: mm 40 – 60 – 80 – 100 – 120 – 150 – 180 – 200

 

Sandwich panels with male female junction, produced using the one shot air intake injection system, in compliance with European regulation EN 14509, appropriate for the creation of cold rooms at positive or negative temperatures. The Bigsystem panels from the PGS 112G Bs3 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly. A perfect union between panels and easy assembly is supported by the use of eccentric fixing hooks.

Available in 2 versions:

  • PGS 112G Bs3_N with 0.5 micro-ribbed surface finish on 2 sides
  • PGS 112G Bs3_L with smooth surface finish on 2 sides

Available thicknesses: mm 60 – 80 – 100 – 120 – 150 – 180 – 200

   

Sandwich panels with tongue and groove joint produced on a continuous line shaper, in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. Labelled CE in compliance with European technical approval ETA 10/0001. The Bigsystem panels from the GS 112 Bs1 line are created to provide high thermal isolation performance, as well as mechanical resistance, a pleasing appearance, hygiene and easy assembly.

Available in 2 versions:

  • GS 112 Bs1_N with 0.5 micro-ribbed surface finishing on 2 sides
  • GS 112 Bs1_L with smooth surface finishing on 2 sides

Available thicknesses: mm 60 – 80 – 100 – 120 – 150 – 180 – 200 - 240.

 

 

Sandwich panels with tongue and groove joint produced with an air intake one shot system, consisting of 2 laminates made of PRFV (polyester reinforced with glass fibre also known as fibreglass) between which high density PUR foam is injected. Appropriate for the realization of cold rooms at both positive and negative temperatures, processing rooms, agricultural/food areas with highly aggressive agents such as dairies, cured meat factories, seafood/fish processing, and all food products in general.

Designed to provide excellent resistance to contact, thermal insulation, a pleasing appearance, hygiene and easy assembly, perfect panel union is ensured through camlocks, which also make assembly easier.

 

 

Sandwich panels tongue-and-groove joint with camlocks.

Manufactured in accordance with European standard EN 14509:2007, specifically designed for the construction of controlled temperatures and humidity rooms, food packaging rooms, clean rooms, ensure high performances of thermal insulation, aesthetic value, hygiene and rapid assembling.

Back

Meat plant construction:

Slaughter equipment:

Deboning rooms:

By-products and skin processing:

Meat processing:

Ice machines:

Sausage production:

Delicatessen production:

Smoking houses:

Hygienic equipment:

Accessories: